Fabrication / Réparation

Le soudage TIG est un procédé de soudage à l'arc avec une électrode non fusible. TIG est un acronyme de Tungsten Inert Gas où Tungsten (Tungstène) désigne l'électrode et Inert Gas (Gaz inerte) désignent le type de gaz plasmagène utilisé.

Dans le cadre du programme de fabrication série des produits de l'entreprise, vous êtes responsables de la réalisation de sous-ensembles conformément à une gamme de fabrication et en utilisant les outillages adaptés dans le respect des règles de sécurité. Vous garantissez la tenue des délais et de la qualité. Vous êtes force de proposition pour l'amélioration du poste de travail, des outillages proposés, etc.

Dans le cadre des retours clients ou production, vous êtes chargés de la remise en état des produits en retour conformément à la documentation technique du produit et en respectant les contraintes de délais contractuelles. Vous garantissez la qualité des produits ainsi réparés et leur utilisation opérationnelle. Vous transmettez les informations techniques au développement pour analyse.

Our job offers
Video
First person

André Hans
Endoscopeur / Snecma 

"It's a fascinating job, with something new every day. Each inspection is different from the last one."

 

What is your job?
I'm a "test quality" technician, and mainly work on development engines. But as an expert in my field I may also be called on to support my colleagues on production engines. I inspect the inside of the engines, in inaccessible areas, using a rigid optical probe, or a flex-probe fitted with a camera.

 

What do you like most about your job?
It's a fascinating job, with something new every day. Each inspection is different from the last one, and you have to regularly find pathways – sometimes very complex – to be able to check out the condition of an inaccessible part, deep in the engine, and identify a problem. I really like the diversity. It's a sort of inquest, where both intuition and experience are very important, because you wind up by sensing where you have to go to find the problem, based on certain clues or symptoms.

I also like working in a team and the variety of contacts with all the people who call on us, whether design offices that want to assess wear on a part over time, the Safran technicians who are sent on-site to support customers, or the customers themselves.

 

Does your job entail a lot of travel?
I work on all types of engines, both commercial and military: the CFM56, the SaM146, for which I regularly travel to Rybinsk, in Russia, and also the TP400 for the Airbus A400M and the M88 that powers the Rafale… I also work on the M53 for the Mirage 2000; I even traveled very recently to the United Arab Emirates to train maintenance technicians working for the air force. When you like to see different countries and not get stuck in a routine, this is an ideal job!

Appuyer sur Entrée pour valider ou Echap pour fermer